Bacharach Model 100 Specifications download pdf (Page 54)

Instruction 0024-9395

Fyrite Pro

5.8 Water Trap / Filter Maintenance

The Water Trap / Filter Assembly removes water con den sate from the gas

sam ple, and also prevents soot from con tam i nat ing the internal com po-

nents of the analyzer.

Drain the water condensate after every test.

Procedure:

1. Disassemble the trap (see Figure 5-3).

2. Pour out all water condensate; then reassemble the trap.

Replace the Filter Element when dirty.

Material Required: • Filter Element, P/N 0007-1644

• Small Flat Blade Screwdriver

Procedure:

1. Disassemble the trap (see Figure 5-3).

2. Remove and discard old filter.

3. Install new filter and reassemble trap.

Figure 5-3. Water Trap / Filter Assembly

Pull apart using a slight

twisting motion

WATER TRAP

CHAMBER

FILTER

CHAMBER

FILTER ELEMENT

Pry apart filter chamber using

a small flat-blade screwdriver

inserted into notch

“A” “B”

When reassembling

the trap, make sure

that surfaces “A” and

“B” are in contact.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 63 64

No comments

Bacharach Model 100 Specifications Page 54