Bacharach Model 100 Specifications download pdf (Page 9)

Instruction 0024-9395

Fyrite Pro

2.0 TECHNICAL CHARACTERISTICS

The Analyzer Directly Measures and Displays:

• Ambient Temperature ............................32 to 212 °F (0 to 100 °C)

• Flue Gas O

content ................................0.0 to 20.9% O

• Flue Gas Temperature ...........................0 to 999 °F (–18 to 537 °C)

• Flue Gas CO content ..............................0 to 2,000 ppm CO

• Draft ........................................................–9.99 to 27 inWC

(–9.99 to 67 mb/HPa)

The Analyzer Computes and Displays:

(when the measured oxygen level is below 17.9%)

• Combustion Efficiency ............................0.1 to 99.9%

• Flue Gas CO

content .............................0.1 to a fuel dependent

maximum value in %

• Flue Gas CO Air-Free content ...............0 to 9,999 ppm

• Excess Air ...............................................0 to 400%

Fuel Selection:

(F1 thru F4 denotes the fuel selected as displayed on the LCD)

• Natural Gas (F1)

• Oil #2 (F2)

• LPG (F3)

• Kerosene (F4)

Normal Operating Conditions:

Temperature:

• Analyzer .................................................32 to 104 °F (0 to 40 °C)

• Probe .......................................................1,000 °F max (538 °C) at

5" insertion

Humidity .......................................................15 to 90% RH,

Non-Condensing

Power Requirements ....................................Four disposable ‘AA’ Alkaline

batteries (an optional AC adapt-

er is available that eliminates

the need for batteries)

Operating Time ................................. Up to 18 hours con tin u ous (pump

run ning and backlight off)

Warm Up Time ................................... 10 or 60 seconds, dependent on

analyzer’s model and setup (Refer

to Section 4.13.1)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

No comments

Bacharach Model 100 Specifications Page 9