Bacharach H-10G Specifications download pdf (Page 3)

3

screwdriver adjustable sensor heat con-

trol is located on the bottom of the unit.

The probe nozzle consists of a trans-

parent tip, airflow ball, filter, and neon

leak-signal lamp, connected to the con-

trol chassis by a length of flexible tubing.

The calibrated reference leak is a

removal bottle containing halogen gas

R11, and is calibrated to provide a leak

equivalent to approximately 0.5 ounce

per year of R134a. As an accessory, a

maintenance kit is provided that contains

extra filters and airflow balls.

Application

The H-10G is intended principally for

use as a serviceman’s tool, although it

also can be used for production line leak

testing. It was developed in response

to an industry that is in the process of

converting to more environmentally safe

refrigerants worldwide. Ozone depleting

chlorine is being reduced or eliminated in

most refrigerants. To adequately leak test

refrigerants like R123 and fluorine based

R134a, a higher detector sensitivity is

required. The H-10G has the capabil-

ity to detect small leaks for all current

chlorine based refrigerants as well as the

new fluorine based R134a or new blends

under development. When using the

H-10G you can be confident it has the

sensitivity to meet your service needs of

today and the capability of meeting your

needs in the years to come.

Please note that heavy gas contamina-

tion in the testing area may cause erratic

operation of the H-10G. This can occur

when the leak in the system is very

large and there is little or no ventilation

in the testing area. Contamination of an

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments