Bacharach H25-IR Specifications Page 66
- Page / 69
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Specifications H25-IR
60 Instruction 3015-4342
7 Specifications
Gases Detected......................... Detects and measures, depending on instrument’s part number:
• CFCs, HCFCs, HFCs and Halogens
R11, R12, R21, R22, R23, R113, R114, R123, R124, R125, R134a, R227,
R236fa, R245fa, R401A, R402A, R402b, R404A, R407A, R407C, R408A,
R409A, R410A, R422a, R422d, R427a, R500, R502, R503, R507, R508B, HFP,
H1211, H1301, H2402, N1230, FA188, FC72
• R600a
• SF
6
Detection Method....................... Infrared
Measurement Units.................... oz/yr, g/yr, mL/s, PaM
3
/s, ppm
Measurement Range ................. 0.03 to 5.00 oz/yr
0.85 to 142 g/yr
0.08 x 10
–4
to 100 x 10
–4
mL/s
0.08 x 10
–5
to 100 x 10
–5
PaM
3
/s
0 to 1,000 ppm
Operating Modes ....................... Search: detects presence and location of gas leaks
Measure: calculates and displays leak rate
Response Time.......................... Up to 2.5 seconds (dependent on probe-hose length)
Sensitivity................................... 0.03 oz/yr (0.9 g/yr) all gases
Resolution.................................. 0.1 leak units
Accuracy:
Leak Rate.............................. ±15% of the reading (certified leak source uncertainty)
±1% of reading (instrument uncertainty)
PPM ...................................... ±10% of reading (can be improved to ±1% if recalibrated using a known
concentration of refrigerant gas)
Temperature Drift....................... ±0.3% of reading per °C
Calibration..................................Internal: calibration performed using the unit’s built-in leak source
External: calibration performed using a customer supplied leak
source of a known gas type and leak rate
Relays........................................ Four SPDT relays (rated 2 A at 250 VAC – inductive and 5 A at 250 VAC –
resistive)), each programmable to energize under 11 different operating
conditions
Audio Speaker ........................... Audible indication of leak level
AC Power................................... 100 to 240 VAC, 50/60 Hz
Battery........................................ 16V
Power Consumption ..................15 Watts
Warm-Up Time........................... 2 minutes (30 minutes to meet published specifications)
Operating Temperature ............. 32 to 122 °F (0 to 50 °C)
Storage Temperature................. 4 to 122 °F (20 to 50 °C)
Ambient Humidity....................... 5 to 90% RH, non-condensing
Dimensions ................................ 4 x 10.75 x 15.5 in.
(101.6 x 273.1 x 393.7 mm)
Weight........................................ 18 lb (8.2 kg)
- Instruction 3015-4342 1
- WARRANTY 2
- Table of Contents 3
- Contents H25-IR 4
- H25-IR Contents 5
- 1 Introduction 7
- 1.2.5 Explosive Atmosphere 8
- 1.2.8 In Case of Malfunction 8
- 1.2.9 Cleaning 8
- 1.3 Ordering Information 9
- Introduction H25-IR 10
- 4 Instruction 3015-4342 10
- 1.6 Functional Overview 11
- 1.7.1 Front View 12
- 1.7.2 Rear View 13
- 1.7.3 Interior 13
- 1.7.4 Standard Probe 14
- 1.7.6 Smart Probe 15
- 1.8 Menu System 16
- 2 Preparing for Operation 17
- 2.5 System Setup 18
- 2.5.3 Relays 19
- 2.5.4 4–20 mA Loop 19
- BRIGHTNESS 20
- 2.6.1 Setup Name 21
- 2.6.2 Range 21
- 2.6.3 Gas Type 22
- 2.6.4 Feedback Mode 22
- 2.6.5 Setpoint 22
- 2.6.6 Search Auto Zero 23
- 18 Instruction 3015-4342 24
- Instruction 3015-4342 19 25
- 20 Instruction 3015-4342 26
- 3 Calibration 27
- 3.2 Internal Calibration 28
- 3.3 External Calibration 29
- 3.4 CAL Factor 30
- Using the CAL Factor 31
- K4=0.0 K5=0.0 32
- Instruction 3015-4342 27 33
- Instruction 3015-4342 34
- 4 Operation 35
- 4.2.3 Range Selection 36
- 4.2.4 Setup Selection 36
- 4.2.5 Volume Adjustment 36
- 4.2.6 Searching for a Leak 37
- 4.2.10 Logged Measurements 39
- 4.3 Fault Conditions 40
- 4.5 RS-232 Communication 41
- 4.6 Serial Output Types 41
- 5 Maintenance 43
- 5.1.2 Last Fault 44
- 5.1.3 IR Emitter 45
- 5.1.4 Pressure 45
- 5.1.5 Loop Test 45
- 5.1.6 Clear Last Fault 45
- 5.2 Factory Menu 46
- 5.2.3 Leak Gas 47
- 5.2.4 Leak Temp 47
- 5.2.5 Leak TEMPCO 47
- 5.2.6 Sensor Cal 47
- 5.2.7 Model Select 48
- 5.3 Flashing Memory 49
- Parts &Service H25-IR 50
- 44 Instruction 3015-4342 50
- H25-IR Operation 51
- 5.4 Part Replacement 52
- 5.4.2 Fuse Replacement 53
- 48 Instruction 3015-4342 54
- 5.4.5.1 Top Cover Removal 55
- 5.4.5.4 DIGIPOT Adjustment 56
- 5.4.5.5 Factory Calibration 56
- 5.5 Replacement Parts 58
- 5.6 Service Centers 59
- H25-IR Specifications 60
- 7 Specifications 66
- H25-IR Appendix A 68
Related products and manuals for Carbon monoxide (CO) detectors Bacharach H25-IR
(28 pages)© 2020, manymanuals.com. All rights reserved. | 1.570 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals